Periodic Inspection Chart; Periodic Inspection Chart - Sea-doo RX Shop Manual

PERIODIC INSPECTION CHART

Maintenance, replacement, or repair of the emission control devices and systems may be per-
formed by any marine SI (spark ignition) engine repair establishments or individual.
Lubrication/corrosion protection
Support and rubber mount condition/tightness
Exhaust system fasteners ➄
RAVE valve cleaning ➄
Counterbalance shaft oil level
Spark plug inspection, cleaning and gap adjustment ➄
Spark plug replacement ➄
TDC setting ➄ (for DI models)
Air compressor, visual condition of hoses. Check for leaks ➄
CAUTION: Main hose between compressor and fuel rail may be hot.
Flushing
Hose condition and fasteners
Inspect/clean engine drain tubes
Water flow regulator valve inspection (carburetor-equipped models)
Carburetor adjustment including choke/throttle cable adjustments
(carburetor-equipped models)
Throttle/choke cables (carburetor-equipped models), inspection/lubrication
Fuel filter (carburetor-equipped models) and lines inspection
Fuel filter replacement
Visually check for oil leakage between head and injector (DI models) ➄
Fuel injection system sensors (except throttle body), visual inspection
(DI models) ➄
Throttle body cleaning and their sensors
(DI models) ➄ ➅
Fuel vent line pressure relief valve inspection
Fuel lines, connections (DI models), check-valve and
fuel system pressurization ➄
Visual inspection: carburetors/throttle bodies, sensors, fuel lines,
fuel rail and fittings (if so equipped) ➄
Air intake silencer fit/tightness
Fuel tank straps visual inspection
Oil injection pump adjustment ➄
Oil filter and lines inspection
Oil filter replacement
Oil reservoir straps
SMR2000-039_02_02A.FM
Subsection 02 (PERIODIC INSPECTION CHART)
DESCRIPTION
www.SeaDooManuals.net
Section 02 MAINTENANCE
FREQUENCY
➀
✔
✔
➃ ✔
➃ ✔
✔➂
✔
✔➀
➀ ✔
✔ ✔
✔
✔
✔
✔
✔ ✔
✔
✔
✔
✔
✔ ✔
✔
0
✔
✔
✔
✔ ✔
✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
02-02-1