Adjustment - Sea-doo RX Shop Manual

Section 10 PROPULSION SYSTEM
Subsection 05 (VARIABLE TRIM SYSTEM)
Apply Loctite Primer N (P/N 293 800 041) to threads
of VTS housing and Loctite 243 (blue) to nut no. 4.
Install nut with sealing washer and torque to 6 N•m
(53 lbf•in) using the VTS socket tool.
Boot and Clamps
Install rubber boot no. 3 over sliding shaft and se-
cure with clamps.

ADJUSTMENT

On these models, no adjustment is required.
10-05-4
SMR2000-068_10_05A.FM
www.SeaDooManuals.net