Sea-doo RX Shop Manual page 38

Section 02 MAINTENANCE
Subsection 02 (PERIODIC INSPECTION CHART)
Electrical connections condition and fastening (ignition system, electrical
box(es), starting system, fuel injectors (DI models), etc.)
MPEM mounting brackets/fasteners
Digitally Encoded Security System
Monitoring beeper
Battery condition and straps
Inspection and cable adjustment
Drive shaft boot and spline condition (if so equipped)
PTO flywheel lubrication
Shifter system/cable adjustment
VTS (Variable Trim System, if so equipped)
Jet pump reservoir oil level/oil condition
Jet pump cover pusher inspection
Jet pump seal
Impeller condition and impeller/wear ring clearance
Water intake grate condition
Bailer pick-ups, check for obstructions
Hull condition
➀ Every 10 hours in salt water use.
➁ These items have to be initially checked after 25 hours. Thereafter, servicing to be made as specified in this chart.
➂ Daily flushing in salt water or foul water use.
➃ Except DI models.
➄ Emission-related component.
➅ In salt water use.
➆ Replace at 150 hours.
02-02-2
DESCRIPTION
www.SeaDooManuals.net
FREQUENCY
✔ ✔
✔
✔
✔ ✔
✔ ✔
✔ ✔
✔ ➁
✔ ✔
✔
✔ ✔
✔
Replace
✔ ➁
✔ ➁
✔
✔
SMR2000-039_02_02A.FM
✔
✔
Replace
✔
➆
✔
✔