Diagnostic Procedures; Diagnostic Procedures; General - Sea-doo RX Shop Manual

DIAGNOSTIC PROCEDURES

GENERAL

Here is the basic order suggested to diagnose a
suspected fuel injection related problem:
– Check the chart in TROUBLESHOOTING sec-
tion to have an overview of problems and sug-
gested solutions.
– Check if there is a MAINT signal reported by the
vehicle information center. If so, use the VCK
(Vehicle Communication Kit) and look for fault
codes to diagnose the trouble.
– Check all fuses.
– Check air/fuel rail pressure.
– Check spark plugs condition.
– Check RAVE valves if stuck.
– Check fuel pump pressure.
– Check air compressor pressure.
SMR2000-052-05-04A.FM
Section 05 ENGINE MANAGEMENT (DI)
Subsection 04 (DIAGNOSTIC PROCEDURES)
www.SeaDooManuals.net
0
05-04-1