Cranking System - Sea-doo RX Shop Manual

3. Hand screw spark plug into cylinder head. Then,
tighten the spark plug clockwise an additional
1/4 turn with a proper socket.
1. Proper socket
2. Improper socket
SPARK
ENGINE
PLUG
NGK
DI
ZFR4F-11

CRANKING SYSTEM

See above for start/stop switch and the DESS post
testing. Refer to STARTING SYSTEM section for
other tests.
SMR2000-051-05-03A.FM
Subsection 03 (COMPONENT INSPECTION AND ADJUSTMENT)
GAP
TORQUE
mm (in)
Hand
tighten +
1.1
1/4 turn
(.043)
with a
socket
www.SeaDooManuals.net
Section 05 ENGINE MANAGEMENT (DI)
05-03-33