Sea-doo RX Shop Manual page 304

Disconnect the wiring harnesses leading out of
steering stem and cut locking tie.
Disconnect the steering cable from the steering
stem arm no. 15.
1. Steering stem arm
2. Steering cable
Detach throttle cable from throttle handle.
1
F00K06A
1. Locking tab
From inside bilge, remove lock nuts no. 14.
SMR2000-069_11_03A.FM
Subsection 03 (ADJUSTABLE STEERING)
1
2
F07K07A
1. Steering support
2. Bolt
3. Lock nut
Remove bolts no. 13 and steering support no. 12
with handlebar and wiring harnesses.
Steering Stem Arm and Support
Loosen bolts no. 17 retaining steering stem arm
no. 15 to support no. 16.
1. Steering stem arm
2. Bolt
Remove steering stem arm and support.
Remove steering stem.
www.SeaDooManuals.net
Section 11 STEERING SYSTEM
3
2
3
11-03-5