Storage; Storage; Engine Draining; Fuel System - Sea-doo RX Shop Manual

STORAGE

ENGINE DRAINING

Check engine drain hose (lowest hose of engine).
Make sure there is no sand or other particles in it
and that it is not obstructed so that water can
leave the engine. Clean hose and fitting as neces-
sary.
CAUTION: Water in engine drain hose must be
free to flow out, otherwise water could be
trapped in engine. Should water freeze in en-
gine, severe damage will occur. Check engine
drain hose for obstructions.
Carburetor-Equipped Models
1. Engine drain hose
DI Models
Disconnect the quick connect fitting. Press both
tabs and pull fitting.
SMR2000-041_02_05A.FM
DISCONNECT THIS HOSE
Lower hose as necessary so that draining can take
place.
Reconnect fitting when done.
Also ensure air compressor drain line is not ob-
structed. Clean as necessary.
All Models

FUEL SYSTEM

Sea-Doo Fuel Stabilizer (P/N 413 408 600) or equiv-
alent should be added in fuel tank to prevent fuel
deterioration and, if so equipped, carburetor
gumming. Follow manufacturer's instructions for
proper use.
Fill up fuel tank completely. Ensure there is no wa-
ter inside fuel tank. If so, flush fuel tank.
CAUTION: Should any water be trapped inside
fuel tank, severe internal damage will occur to
the fuel injection system.
www.SeaDooManuals.net
Section 02 MAINTENANCE
Subsection 05 (STORAGE)
0
02-05-1