Glove Box - Sea-doo RX Shop Manual

GLOVE BOX

RX/RX DI models
Removal
Remove handle from shift lever.
1. Unscrew
Unscrew retaining screws then remove side pan-
els.
1. Unscrew
SMR2000-071_12_02A.FM
Subsection 02 (ADJUSTMENT AND REPAIR)
Open front storage cover and remove basket.
Unscrew nut retaining vent tube to bracket.
1. Unscrew
Pull vent tube out.
From the engine compartment, insert a hand
through the vent tube hole and press glove box
lock tabs to release.
1. Insert your hand here to release the lock tabs
www.SeaDooManuals.net
Section 12 HULL/BODY
12-02-9