Glove Box Cover - Sea-doo RXT iS 255 2009 Shop Manual

Section 07 BODY AND HULL
Subsection 02 (BODY)

GLOVE BOX COVER

smr2009-042-055_a
1. Glove box cover
Glove Box Cover Removal
1. Move steering in its upper position.
2. Open glove box cover until cover hinges are
aligned with front body module openings.
smr2009-042-025_a
1. Glove box cover hinge
2. Front body module opening
3. Pull the bottom of cover gently to release
hinges.
Glove Box Cover Installation
Reverse the removal procedure.
478
FRONT GRILLE
smr2009-042-056_a
LOCATED UNDER STORAGE COMPARTMENT COVER
1. Front grille
Front Grille Removal
STORAGE
1. Remove the
COVER
, see procedure in this subsection.
2. Press on both tabs securing front grille to front
body module.
smr2009-042-054_a
1. Front grille
2. Retaining tabs
3. Remove grille.
Front Grille Installation
The installation is the reverse of the removal pro-
cedure.
COMPARTMENT
smr2009-042