Front Panel Controls
See Figure 1.1 to review the controls, LEDs, and meters located on the power
supply's front panel. Check the following sections for additional descriptions of
front panel controls and functions.
•
•
•
Local Voltage and Current Limit Setting Preview
(See page 43 for more information.)
OVP Adjust Potentiometer (OVP SET)
(See page 61 for more information.)
OVP Setting Preview Switch (OVP CHECK)
(See page 61 for more information.)
Voltage Mode LED
AC Power
Switch
Output Voltage
Control Knob
Output Current Control Knob
Figure 1.1 Power Supply Front Panel
Release 3.1
"Mechanical Specifications" on page 33
"Functional Tests" on page 43
Section 3, "Local Operation"
OVP Shutdown LED (OVP)
Switch (V-I PRESET)
Current Mode LED
Remote Programming LEDs.
(For units with digital
programming interface installed.)
Features and Specifications
Front Panel Controls
Shutdown LED (S/D)
Standby Switch (STANDBY)
(See page 63 for more information.)
Remote Programming LED (REM)
Return to Local Programming
(LOCAL)
(For units with digital programming
interface installed.)
Over Temperature
Protection LED (OTP)
AC Fail LED (ACF)
Current Meter
Voltage Meter
17