Service Tables; Service Program Mode - Ricoh B264 Service Manual

3. SERVICE TABLES


CAUTION
Never turn off the main power switch when the power LED is lit or flashing.
To avoid damaging the hard disk or memory, press the operation power
switch to switch the power off, wait for the power LED to go off, and then
switch the main power switch off.
NOTE: The main power LED (
ARDF is open, while the main machine is communicating with a facsimile
or the network server, or while the machine is accessing the hard disk or
memory for reading or writing data.

3.1 SERVICE PROGRAM MODE

SP1-XXX (Bit Switches)
1
Mode No.
101 System Switch
001 – 032
102 Ifax Switch
001 – 016
103 Printer Switch
001 – 016
104 Communication Switch
001 – 032
105 G3-1 Switch
001 – 016
106 G3-2 Switch
001 – 016
107 G3-3 Switch
001 – 016
108 G4 Internal Switch
001 – 032
SM
) lights or flashes while the platen cover or
Section 3.2 Bit Switches
00 – 1F Change the bit switches for system settings
for the fax option
Section 3.2 Bit Switches
00 – 0F Change the bit switches for internet fax
settings for the fax option
Section 3.2 Bit Switches
00 – 0F Change the bit switches for printer settings
for the fax option
Section 3.2 Bit Switches
00 – 1F Change the bit switches for communication
settings for the fax option
Section 3.2 Bit Switches
00 – 0F Change the bit switches for the protocol
settings of the standard G3 board
Section 3.2 Bit Switches
00 – 0F Change the bit switches for the protocol
settings of the optional G3 board
Section 3.2 Bit Switches
00 – 0F Change the bit switches for the protocol
settings of the optional G3 board
Section 3.2 Bit Switches
00 – 1F Not used (Do not change the bit switches)
31
SERVICE PROGRAM MODE
Function
B779