Memory Clear: Sp5-801 - Ricoh B264 Service Manual

SERVICE PROGRAM MODE TABLES

5.2.9 MEMORY CLEAR: SP5-801

Executing Memory All Clear resets all the settings stored in the NVRAM to their
default settings except the following:
SP7-003-1:
SP5-811-1:
SP5-907:
1. Execute SP5-990 to print out all SMC Data Lists.
2. Open SP mode 5-801.
3. Press the number for the item that you want to initialize. The number you select
determines which application is initialized. For example, press 1 if you want to
initialize all modules or select the appropriate number from the table below.
5801 Memory Clear
5801 1 All Clear
5801 2
Engine
5801 3
SCS
5801 4 IMH Memory Clr
5801 5 MCS
5801 6 Copier application
5801 7 Fax application
5801 8 Printer application
5801 9
Scanner application
5801 10
Web
Service/Network
Application
5801 11 NCS
5801 12 R-FAX
5801 13 Clear DCS Settings
5801 14
Clear UCS Settings
1*
: Resetting 1~3 resets the operation panel screen coordinates, so after executing 1, 2, or 3,
you must re-calibrate the screen.
B264/B265
Electrical total counter value
Machine serial number
Plug & Play Brand Name and Production Name Setting
Initializes items 2 ~ 12 below.
Initializes all registration settings for the engine
and processing settings.
Initializes default system settings, CSS settings,
operation display coordinates, and ROM update
information.
Initializes the registration setting for the image
memory handler by deleting all image files on
the HDD.
Initializes the automatic delete time setting for
stored documents.
Initializes all copier application settings.
Initializes the fax reset time, job login ID, all
TX/RX settings, local storage file numbers, and
off-hook timer.
Initializes the printer defaults, programs
registered, the printer SP Bit SW, and printer
CSS counter.
Initializes the scanner defaults for the scanner
and all the Scanner SP modes.
Deletes the NFA management files and
thumbnails, and initializes the JOB login ID.
Initializes the system defaults and interface
settings (IP addresses also), the
SmartNetMonitor for Admin, WebStatusMonitor
settings, and the TELNET settings.
Initializes the Job login ID, SmartNetMonitor for
Admin, Job History, and local storage file
numbers.
Initialization
Initialization
Comments
*1
5-128
*1
*1
SM