Ricoh B264 Service Manual page 319

5839 11 Logout
Handles the login request of the login initiator for SBP-2. (1-bit)
Bit0: Off
Bit1: On
OFF: Disable (refuse login). Initiator retry during login. Login refusal on arrival of
login request (standard operation)
ON: Enable (force logout). Initiator retry during login. Login refusal on arrival of login
request, and the initiator forces the login.
5839 12 Login
Enables or disables the exclusive login feature (SBP-2 related).
Bit0: Off
Bit1: On
OFF: Disables. The exclusive login (LOGIN ORB exclusive it) is ignored.
ON: Enables. Exclusive login is in effect.
5839 13 Login MAX
Sets the maximum number of logins from the initiator (6-bits)
[0~63/1]
0: Reserved
63: Reserved
5840 IEEE 802.11b
5840 6 Channel MAX
Sets the maximum range of the bandwidth for the wireless LAN. This bandwidth
setting varies for different countries.
[1~14/1]
5840 7 Channel MIN
Sets the minimum range of the bandwidth for operation of the wireless LAN. This
bandwidth setting varies for different countries.
[1~14/1]
5840 11 WEP Key Select
Determines how the initiator (SBP-2) handles subsequent login requests.
[0~1/1]
0: If the initiator receives another login request while logging in, the request is
refused.
1: If the initiator receives another login request while logging in, the request is
refused and the initiator logs out.
Note: Displayed only when the wireless LAN card is installed.
SM
SERVICE PROGRAM MODE TABLES
5-55 B264/B265