Ricoh B264 Service Manual page 254

SERVICE CALL CONDITIONS
925 B Net File function error
The NetFile file management on the
HDD cannot be used, or a NetFile
management file is corrupted and
operation cannot continue. The
HDDs are defective and they
cannot be debugged or partitioned,
so the Scan Router functions
(delivery of received faxes,
document capture, etc.), Web
services, and other network
functions cannot be used.
HDD status codes are displayed
below the SC code:
Here is a list of HDD status codes:
Display
(-1) HDD not connected
(-2) HDD not ready
(-3) No label
(-4) Partition type incorrect
(-5) Error returned during label read or check
(-6) Error returned during label read or check
(-7) "filesystem" repair failed
(-8) "filesystem" mount failed
(-9) Drive does not answer command
(-10) Internal kernel error
(-11) Size of drive is too small
(-12) Specified partition does not exist
(-13) Device file does not exist
B264/B265
Meaning
4-26
• Refer to the four procedures below
(Recovery from SC 925).
SM