Ricoh B264 Service Manual page 334

SERVICE PROGRAM MODE TABLES
5863 SMP/FTP/NCP Settings
5863 1 SMB Default User Name
This SP sets the default user name used for SMB sending.
5863 2 SMB Default Password
This SP sets the default password used for SMB sending.
5863 3 FTP Default User Name
This SP sets the default user name used for FTP sending.
5863 4 FTP Default Password
This SP sets the default password for FTP sending.
5863 6 NCP Default User Name
This SP sets the default user name used for NCP sending.
5863 7 NCP Default Password
This SP sets the default password for NCP sending.
5870 Common Key Info Writing
Writes to flash ROM the common proof for validating the device for NRS
specifications.
5870 1 Writing
5870 3 Initialize
5871 HDD Function Disable DFU
Disables the HDD functions by suppressing all functions that write data to the HDD.
After this SP is executed, the machine must be switched off and on to enable the
setting.
[0~1/1]
0: OFF
1: ON
Note: This SP is intended for use during installation of the Data Overwrite Security
Unit B735 (a new option). For more, see section "1. Installation".
5872 HDD Overwrite Status Check DFU
5873 SD Card Appli Move
Allows you to move applications from one SD card another. For more, see
Printer/Scanner Service Manual 1.3 "Merging Applications on One SD Card".
5873 1 Move Exec
5873 2 Undo Exec
5875 SC Auto Reboot
This SP determines whether the machine reboots automatically when an SC error
occurs.
Note: The reboot does not occur for Type A SC codes.
5875 1 Reboot Setting
5875 2 Reboot Type
B264/B265
Note: These SPs are for future use and currently are not used.
Executes the move from one SD card to another.
This is an undo function. It cancels the previous execution.
The machine reboots automatically when the machine issues an
SC error and logs the SC error code. If the same SC occurs again,
the machine does not reboot.
The machine does not reboot when an SC error occurs.
5-70 SM