LCT INSTALLATION (B543)
1.10.2 LCT INSTALLATION PROCEDURE
CAUTION
Unplug the main machine power cord before starting the following
procedure.
The Paper Tray Unit (B542) or the Cabinet (FAC25) must be installed before
installing the LCT.
NOTE: Use the LCT mounting hardware supplied with the Cabinet (FAC25).
1. Unpack the LCT and remove the tapes.
2. Open the right cover of the paper tray unit [A].
3. Open the lower right cover [B] and cut the holding band [C].
NOTE: When cutting the holding band, the upper part of the band should be
cut as shown. Otherwise, paper jams may occur.
4. Remove the lower right cover.
B264/B265
[A]
1-50
[C]
[B]
B543I504.WMF
SM