Ricoh B264 Service Manual page 64

BRIDGE UNIT INSTALLATION (B538)
B538I402.WMF
7. If an optional finisher is to be installed, attach two exit mylars [A] to the bridge
unit.
8. Remove the cover [B].
9. Install the bridge unit [C] ( x 2).
10. Connect the bridge unit I/F harnesses [D] ( x 2).
11. Install the connector cover [E].
12. Turn on the main switch and check the bridge unit operation (make sure that
there are no paper jams).
B264/B265
[A]
[B]
[C]
1-34
[D]
[E]
B538I404.WMF
SM