Service Tables; Dip Switch Settings - Ricoh B264 Service Manual

3. SERVICE TABLES

3.1 DIP SWITCH SETTINGS

The DIP switches should not be set to any combination other than those listed in
the table below.
SW100
1 2
0 0 Normal operation mode (Default)
1 0 Packing mode.
• Before packing the machine, do the following: Set switch 1 to 1 then back to
zero. The lower tray moves to the lowest position. Then turn off the main switch.
• After unpacking the machine, do the following: After turning the main switch back
on, the lower tray returns to home position automatically.
SM
Description
9
DIP SWITCH SETTINGS
B408