Ricoh B264 Service Manual page 328

SERVICE PROGRAM MODE TABLES
5852* SMTP
Simple Mail Transfer Protocol. The protocol for communication between Internet
main MTAs (Message Transfer Agents).
5852 1* SMTP Server Name
5852 2* SMTP Server Port
Number
5852 3* SMTP Type
5852 4* SMTP User Name
5852 5* SMTP Password
5852 7* POP Before SMTP
5852 8* POP Server Name
5852 9* POP Server Port
Number
5852 10* POP User Name
5852 11* POP Password
5852 12* POP Auth.
Encryption
5853* Stamp Data Download
Use this SP to download the fixed stamp data stored in the firmware of the ROM
and copy it to the HDD. This SP can be executed as many times as required. This
SP must be executed after replacing or formatting the hard disks.
Note: This SP can be executed only with the hard disks installed.
5856 Remote ROM Update
When set to "1" allows reception of firmware data via the local port (IEEE 1284)
during a remote ROM update. This setting is reset to zero after the machine is
cycled off and on.
[0~1 / 0 / 1]
0: Not allowed
1: Allowed
B264/B265
Allows you to specify the server by either its IP address or
host name. If you use the host name, then you must also
specify the DNS.
Sets the port number of the SMTP server.
[0~65535 / 25 / 1]
Enter a text string for the user name.
Enter a character string for the password.
During mail sending, determines whether the POP server
connection is validated before connecting to the SMTP
server. This prevents unauthorized access to the SMTP
server and requires users to access and log onto the
POP3 server before sending e-mail.
0: No. POP server connection validated.
1: Yes. POP server connection validated before SMTP
connection.
Sets the name of the POP server. You can use either the
IP address or the host name. If you use the host name,
then you must also specify the DNS.
Sets the port number of the POP server.
[1~65535 / 110 / 1]
Sets the POP user name used to validate POP connection
before SMTP connection. This validation is switched on
with SP5852 6 (POP Before SMTP). Limit: 63 characters.
Sets the POP password used to validate POP connection
before SMTP connection. This validation is switched on
with SP5852 6 (POP Before SMTP). Limit: 63 characters.
Determines whether encryption is done when POP
connection is validated before SMTP connection.
[0~2 / 0 / 1]
0: Automatic
1: No. Without encryption.
2: Yes. With encryption.
5-64 SM