Ricoh B264 Service Manual page 787

SP5-XXX (Initializing)
5
Mode No.
101 Initialize SRAM
000
102 Erase All Files
000
103 Reset Bit Switches
000
104 Factory setting
000
105 Initialize All Bit Switches
000
106 Initialize Security Bit Switches
000
SP6-XXX (Reports)
6
Mode No.
101 System Parameter List
000
102 Service Monitor Report
000
103 G3 Protocol Dump List
001 G3 All
Communications
002 G3-1 (All
Communications)
103 003 G3-1
(1 Communication)
004 G3-2
(All Communications)
005 G3-2
(1 Communication)
006 G3-3
(All Communications)
007 G3-3
(1 Communication)
104 G4 Protocol Dump List
001 Dch + Bch 1
SM
SERVICE PROGRAM MODE
Function
Initializes the bit switches and user
parameters, user data in the SRAM, files in
the SAF memory, and clock.
Erases all files stored in the SAF memory.
Resets the bit switches and user
parameters.
Resets the bit switches and user
parameters, user data in the SRAM and
files in the SAF memory.
Initializes all the current bit switch settings.
Initializes only the security bit switches. If
you select automatic output/display for the
user parameter switches, the security
settings are initialized.
Function
Touch the "ON" button to print the system
parameter list.
Touch the "ON" button to print the service
monitor report.
Prints the protocol dump list of all
communications for all G3 lines.
Prints the protocol dump list of all
communications for the G3-1 line.
Prints the protocol dump list of the last
communication for the G3-1 line.
Prints the protocol dump list of all
communications for the G3-2 line.
Prints the protocol dump list of the last
communication for the G3-2 line.
Prints the protocol dump list of all
communications for the G3-3 line.
Prints the protocol dump list of the last
communication for the G3-3 line.
Not used (Do not change the bit switches)
35 B779