Ricoh B264 Service Manual page 899

5. Remove the SD card slot cover [A]
(x1).
6. Insert the Printer/Scanner SD card [B]
in SD card slot C1.
7. Reattach the covers.
8. Connect the LAN cable to the "NIC"
connection.
9. Connect the USB cable to the "USB"
connection.
10. Remove the 1st, 2nd, 4th, and 5th
blank key tops.
NOTE: The 3rd blank keytop from the
top is reserved for the "Fax" keytop.
Do not remove it at this time.
11. Replace the blank keytops:
Copy
Document Server
Printer
Scanner
12. Connect the machine's power cord and turn the main power switch on.
13. Enable the network and USB functions.
Important: The NIB and USB functions must be enabled with SP5985. These
functions are built into the controller.
•
To enable the Ethernet function, enter the SP mode and set SP5985-001
(On Board NIC) to "1" (Enable).
• To enable the USB function, enter the SP mode and set SP5985-002 (On
Board USB) to "1" (Enable).
SM
INSTALLING CONTROLLER OPTIONS
9
[B]
[A]
B783I903.WMF
B783