Ricoh B264 Service Manual page 111

Install Anti-Static Springs on Operation Panel
[A]
1. Remove the screws holding the operation panel [A] ( x2. )
2. Pull the operation panel away from the copier (do not disconnect or remove)
and turn it over.
3. Peel the covers from an anti-static springs [B] and attach them as shown.
4. Press down gently on each spring to confirm that each spring is attached
securely.
5. Reattach the operation panel to the machine ( x2).
SM
SCANNER ACCESSIBILITY OPTION (B815)
[B]
1-81
B815I107.WMF
B264/B265