Ricoh B264 Service Manual page 349

T:Total Jobs
8001
8002 C:Total Jobs
8003 F:Total Jobs
8004 P:Total Jobs
8005 S:Total Jobs
8006 L:Total Jobs
• These SPs reveal the number of times an application is used, not the number of
pages processed.
• When an application is opened for image input or output, this counts as one job.
• Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
• Only jobs executed by the customer are counted. Jobs executed by the customer
engineer using the SP modes are not counted.
• When using secure printing (when a password is required to start the print job),
the job is counted at the time when either "Delete Data" or "Specify Output" is
specified.
• A job is counted as a fax job when the job is stored for sending.
• When a fax is received to fax memory, the F: counter increments but the L:
counter does not (the document server is not used).
• A fax broadcast counts as one job for the F: counter (the fax destinations in the
broadcast are not counted separately).
• A fax broadcast is counted only after all the faxes have been sent to their
destinations. If one transmission generates an error, then the broadcast will not
be counted until the transmission has been completed.
• A printed fax report counts as one job for the F: counter.
• The F: counter does not distinguish between fax sending or receiving.
• When a copy job on the document server is printed, SP8022 also increments,
and when a print job stored on the document server is printed, SP8024 also
increments.
• When an original is both copied and stored on the document server, the C: and
L: counters both increment.
• When a print job is stored on the document server, only the L: counter
increments.
• When the user presses the Document Server button to store the job on the
document server, only the L: counter increments.
• When the user enters document server mode and prints data stored on the
document server, only the L: counter increments.
• When an image received from Palm 2 is received and stored, the L: counter
increments.
• When the customer prints a report (user code list, for example), the O: counter
increments. However, for fax reports and reports executed from the fax
application, the F: counter increments.
SM
SERVICE PROGRAM MODE TABLES
These SPs count the number of times each
application is used to do a job.
[0~9999999/ 0 / 1]
Note: The L: counter is the total number of times
the other applications are used to send a job to
the document server, plus the number of times a
file already on the document server is used.
5-85 B264/B265