Ricoh B264 Service Manual page 797

System Switch 16
No FUNCTION
0 Parallel Broadcasting
0: Disabled
1: Enabled
1 Priority setting for the G3 line.
0: PSTN-1 > PSTN-2 or 3
1: PSTN-2 or 3 > PSTN-1
2-7 Not used
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19
No FUNCTION
0-5 Not used
6 Extended scanner page
memory after memory option
is installed
0: Disabled
1: Enabled
7 Special Original mode
0: Disabled
1: Enabled
System Switch 1A
No. FUNCTION
0-7 LS RX memory capacity
threshold setting
00-FF (0-1020 Kbyte: Hex)
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
SM
COMMENTS
1: The machine sends messages simultaneously
using all available ports during broadcasting.
This function allows the user to select the default G3
line type. The optional SG3 unit(s) are required to
use the PSTN-2 or 3 setting.
Do not change these settings.
COMMENTS
Do not change the settings.
0: After installing the memory expansion option, the
scanner page memory is extended to 4 MB from 2
MB.
1: If this bit is set to 1 after installing the memory
expansion option, the scanner page memory is
extended to 12 MB. But the SAF memory decreases
to 18 MB.
1: If the customer frequently wishes to transmit a form
or letterhead which has a colored or printed
background, change this bit to "1". "Original 1" and
"Original 2" can be selected in addition to the "Text",
"Text/Photo" and "Photo" modes.
COMMENTS
Sets the value to x4KB. When the amount of
available memory drops below this setting, RX
documents are printed to conserve memory.
Initial setting 0x80 (512 KB)
45
BIT SWITCHES
SP No. 1-101-023
SP No. 1-101-026
B779