Ricoh B264 Service Manual page 308

SERVICE PROGRAM MODE TABLES
5802* Printer Free Run
Performs a free run. The scanner scans once and the printer prints for the number
of copies requested. To perform the free run, after selecting "1", press the Copy
Window to enter copy mode, input the number of copies, and then press the Start
key. To stop the free run, press .
5803 Input Check
Displays the signals received from sensors and switches. ( 5.2.5)
5804 Output Check
Turns on the electrical components individually for test purposes. ( 5.2.6)
5807 Option Connection Check
5807 1 ARDF
5807 2 Bank (Paper Tray Unit)
5807 3 LCT
5807 4 Finisher (1000-sheet, Two-Tray
finisher)
5811 Machine No. Setting
This SP presents the screen used to enter the 11-digit number of the machine.
The allowed entries are "A" to "Z" and "0" to "9". The setting is done at the factory,
and should not be changed in the field. DFU
5812* Service Tel. No. Setting
Use these SP modes to input service and support telephone numbers. Enter the
number and press
Press the  key to input a pause. Press the "Clear modes" key to delete the
telephone number.
5812 1* Service
5812 2* Facsimile
5812 3* Supply
5812 4* Operation
B264/B265
[Disable] [Enable]
Execution will return either a "1" or "0":
0: Device not connected correctly.
1: Device connected correctly.
Service representative telephone number.
Fax number of service representative
Supplier of consumables
Operation support
5-44 SM