Ricoh B264 Service Manual page 344

SERVICE PROGRAM MODE TABLES
7801 ROM No./Firmware
Version
7803* PM Counter Display
7804 PM Counter Reset
7807 SC/Jam Counter Reset
This SP does not reset the jam history counters: SP7-507, SP7-508.
7808 Counter Reset
7810 Access Code Clear
Use to clear the access code if the customer forgets the code. After clearing the
code is reset for Null and the password entry display does not open.
7811 Original Count Clear
7816 Print Counter Reset by Tray
7816 1 Bypass
7816 2 Tray 1
7816 3 Tray 2
7816 4 Tray 3
7816 5 Tray 4
7816 6 LCT
7825 Total Counter Reset
7826 MF Error Counter Japan Only
Displays the number of counts requested of the card/key counter.
7826 1 Error Total
7826 2 Error Staple
7827 MF Error Counter Clear
Press Execute to reset to 0 the values of SP7826. Japan Only
7832 Self-Diagnosis Result Display
Execute to open the "Self-Diagnose Result Display" to view details about errors. Use
the keys on in the display on the touch-panel to scroll through all the information. If no
errors have occurred, you will see the "No Error" notation.
B264/B265
Displays the ROM number and firmware version
numbers.
Displays the PM counter since the last PM.
Resets the PM counter. To reset, press .
Resets the SC and jam counters. To reset, press .
Resets all counters except SP7-003-***, SP7-006-***.
To reset, press .
Clears the access code. To clear, press .
Clears the original total display, displayed with SP7-
002-***. To clear, press .
Resets the total copy count by paper tray. To reset, press
.
Use these SP modes when replacing the pick-up, feed,
and separation rollers.
No longer used. (Has no effect)
A request for the count total failed at power on. This error will
occur if the device is installed but disconnected.
The request for a staple count failed at power on. This error will
occur if the device is installed but disconnected.
Opens the "Self-Diagnose Result Display"
5-80 SM