Ricoh B264 Service Manual page 116

SCANNER ACCESSIBILITY OPTION (B815)
Replace the Front Rubber Feet with the Adjustment Screws
1. Remove the cover [A] ( x3).
2. Under the right front corner of the
scanner unit, insert a flathead
screwdriver [B] behind the metal
bracket [C] and dislodge the plastic
pin [D].
3. Pull out the plastic pin and remove
the rubber foot [E].
4. Remove the seal [F] from the
adjusting pin spacer [G], then attach
the pin spacer to the scanner unit.
5. Turn the metal foot [H] until it stops.
6. Reinstall the cover [A] ( x3).
7. Repeat Steps 2 to 5 at the left front.
B264/B265
[D]
[E]
[F]
[G]
1-86
[B]
[C]
B815I116.WMF
[F]
[G]
B815I117.WMF
[A]
[H]
SM