Ricoh B264 Service Manual page 332

SERVICE PROGRAM MODE TABLES
5860 18 Limit Size of RX Mail
This SP specifies the maximum size of mail that can be received.
[1~50/2/1 MB]
5860 19 Server Mail Store
This SP setting determines whether received mail is stored on the server.
0: Received mail not stored
1: All received mail stored
2: Stores only mail that generated errors during receiving
5860 20 Partial Mail Receive Timeout
[1~168/72/1]
Sets the amount of time to wait before saving a mail that breaks up during reception.
The received mail is discarded if the remaining portion of the mail is not received
during this prescribed time.
5860 21 MDN Response RFC2298Compliance
Determines whether RFC2298compliance is switched on for MDN reply mail.
[0~1/1]
0: No
1: Yes
5860 22 SMTP Auth. From Field Replacement
Determines whether the FROM item of the mail header is switched to the validated
account after the SMTP server is validated.
[0~1/1]
0: No. "From" item not switched.
1: Yes. "From" item switched.
5860 23 SMTP Certification Account Mail
This is the mail address for SMTP certification. When SMTP certification is done in
response to a send request for a document or text mail, this SP sets the mail address
for the SMTP protocol MAIL FROM command in the following cases:
• When the SMTP certification information has not been set from the software
application.
• When the SMTP certification information for UCS has been set or not set on the
mainframe with the User Tools.
5860 24 POP3/IMAP4 Account Mail Address
This is the mail address for POP Before SMTP mail address. When POP Before
SMTP certification is done in response to a send request for a document or text mail,
this SP sets the mail address for the SMTP protocol MAIL FROM command in the
following cases:
• When the POP Before SMTP certification information has not been set from the
software application.
• When the SMTP certification information for UCS has been set or SMTP
certification information has not set on the mainframe with the User Tools.
• Also, when SP5960 022 is set to "1" (Yes – "From" item switched), this mail
address is inserted into the header for the "From" item.
B264/B265 5-68 SM