Installing Sd Cards; Sd Cards - Ricoh B264 Service Manual

1.2 INSTALLING SD CARDS


WARNING!
Always turn the machine off and disconnect the machine power cord
before you install a controller option.
Important!
• To prevent damage to the controller box, always do your work carefully. Do not
put your hand or a tool into the box when you remove the controller box or install
an option.
• To prevent damage to the circuits on the boards, always touch a metal surface to
remove static charge from your hands before you touch electronic components.

1.2.1 SD CARDS

SD cards are held in position by a small spring-lock mechanism.
1. To install an SD card, push it into the slot until it stops, then release it.
2. To remove an SD card, push the SD card in carefully to release it, and then
remove it from the slot.
Important: To prevent damage to the SD card or the slot lock, always push the
card in, to release it, before you try to remove it.
SM
INSTALLING SD CARDS
3 B783