Drum - Ricoh B264 Service Manual

3.11.2 DRUM

[B]
B195R932.WMF
[A]
1. Remove the PCU ( 3.11.1)
2. Toner cap [A]
3. Insert the toner cap [A] into the toner entrance hole [B].
NOTE: Make sure that the cap is inserted completely into the hole.
4. On the left side of the PCU, disconnect the
spring [C].
5. On the right side of the PCU disconnect the
spring [D] and attach it to hooks as shown.
• To prevent breaking the weaker hook
a pair of needle-nose pliers to disconnect the
spring at , then re-attach to
• Moving this spring retracts the movable drum
cleaning blade so it does not touch the
surface of the drum when the drum is re-
installed.
SM
PHOTOCONDUCTOR UNIT (PCU)
[C]
, use
and .
3-31
[D]
B195R934.WMF
3 3
2 2
1 1
B195R935.WMF
B264/B265