Ricoh B264 Service Manual page 250

SERVICE CALL CONDITIONS
850 B Net I/F error
• Duplicate IP addresses.
• Illegal IP address.
• Driver unstable and cannot be
used on the network.
851 B IEEE 1394 I/F error
Driver setting incorrect and cannot
be used by the 1394 I/F.
853 B Wireless LAN Error 1
During machine start-up, the
machine can get access to the
board that holds the wireless LAN,
but not to the wireless LAN card
(802.11b or Bluetooth).
854 B Wireless LAN Error 2
During machine operation, the
machine can get access to the
board that holds the wireless LAN,
but not to the wireless LAN card
(802.11b or Bluetooth).
855 B Wireless LAN error 3
An error was detected on the
wireless LAN card (802.11b or
Bluetooth).
856 B Wireless LAN error 4
An error was detected on the
wireless LAN card (802.11b or
Bluetooth).
857 B USB I/F Error
The USB driver is not stable and
caused an error.
861 B HDD re-try failure
At power on with the HDD detected,
power supply to the HDD is
interrupted, after the HDD is
awakened from the sleep mode, the
HDD is not ready within 30 s.
B264/B265
• IP address setting incorrect
• Ethernet board defective
• Controller board defective
• NIB (PHY), LINK module defective;
change the Interface Board
• Controller board defective
• Wireless LAN card missing (was
removed)
• Wireless LAN card missing (was
removed)
• Wireless LAN card defective
• Wireless LAN card connection incorrect
• Wireless LAN card defective
• PCI connector (to the mother board)
loose
• Bad USB card connection
• Replace the controller board
• Harness between HDD and board
disconnected, defective
• HDD power connector disconnected
• HDD defective
• Controller board defective
4-22 SM