31 October 2001
5. .SERVICE TABLES
5.1 USING SERVICE PROGRAM MODES
Use the service program modes (SP modes) to check electrical data, change
operating modes, and adjust values.
5.1.1 ACCESSING SP MODES
Entering SP Mode
1. Key in the following sequence.
Method 1:
! → " → # → $ → %
• Hold the % key down for longer than 3 seconds.
Method 2:
! → % →
2. The zoom counter displays "SP1".
3. Go to section 5.1.2.
Leaving SP Mode
!
Press the
key one or more times.
→ &
Combine key
5-1
USING SERVICE PROGRAM MODES