Ricoh B264 Service Manual page 113

3. Remove:
[A]: BICU shield plate ( x3)
[B]: IPU shield plate ( x1)
NOTE: A support on the BICU shield
plate overlaps a support of the IPU
shield below. One screw [C] fastens
both.
4. Remove the harness clamps from the
old IPU shield plate and attach them to
the new plate (x2).
5. Reattach:
• New IPU shield plate ( x1)
• BICU shield plate ( x3).
• Controller box ( x5,  x1)
• Reattach rear lower cover ( x4)
• Reattach the corner plate ( x2)
• ARDF
Important:
• This completes the pre-installation procedure for this option.
• The mainframe can now be moved to the work site.
SM
SCANNER ACCESSIBILITY OPTION (B815)
[A]
[C]
[B]
1-83
B815I110.WMF
B815I111.WMF
B264/B265