Ricoh B264 Service Manual page 331

5860 6 SMTP Certification Encryption
This setting determines whether the password for SMTP certification is encrypted.
0: Automatic
1: No encryption done
2: Encryption done
5860 7 POP Before SMTP
This setting determines whether the transmission connects with the POP server first
for certification before it connects to the SMTP server for sending.
0: No connection to POP server
1: Connection to POP server
5860 8 Standby Wait Time After POP3 Certification
This SP sets the amount of time to allow for the connection to the SMTP server after
the transmission has connected to the POP server and been certified during the
execution of POP Before SMTP.
[0~10000/300/1]
5860 9 RX Protocol
This SP specifies POP3 protocol or switches off receiving.
0: No receiving
1: POP3 protocol
5860 10 POP3/IMAP4 Server Name
This SP specifies the POP3/IMAP4 server that uses POP Before SMTP during mail
receiving. The server can be specified either by IP address or host name. If you use
the host name, you also need the name of the DNS server.
5860 11 POP3/IMAP4 User Name
This SP sets the user name used during POP3/IMAP4 certification.
5860 12 POP3/IMAP4 Password
This SP sets the password used during POP3/IMAP4 certification.
5860 13 POP3/IMAP4 Certification Encryption
This SP specifies whether password encryption is done for POP3/IMAP4 certification.
0: Automatic
1: No encryption done
2: Encryption done
5860 14 POP3 Server Port Number
This SP sets the number of the POP3 server port.
[1~65535/110/1]
5860 15 IMAP4 Server Port Number
This SP sets the number of the IMAP4 server port.
[1~65535/143/1]
5860 16 SMTP RX Port Number
This SP sets the number of the port that receives SMTP mail.
[1~65535/25/1]
5860 17 Mail RX Interval
This SP sets the timing for mail received at regular intervals.
[2~1440/15/1 min.]
Note: Setting this SP to "0" switches off receiving mail at timed intervals.
SM
SERVICE PROGRAM MODE TABLES
5-67 B264/B265