Ricoh B264 Service Manual page 377

8681 T:PCFAX
TXPGS
8683 F:PCFAX
TXPGS
• This counts pages sent from a PC using a PC fax application, from the PC
through the copier to the destination.
• When sending the same message to more than one place using broadcasting,
the pages are only counted once. (For example, a 10-page fax is sent to location
A and location B. The counter goes up by 10, not 20.)
8691 T:TX PGS/LS
8692 C:TX PGS/LS
8693 F:TX PGS/LS
8694 P:TX PGS/LS
8695 S:TX PGS/LS
8696 L:TX PGS/LS
NOTE: 1) Print jobs done with Web Image Monitor and Desk Top Binder are
added to the count.
2) If several documents are merged for sending, the number of pages
stored are counted for the application that stored them.
3) When several documents are sent by a Fax broadcast, the F: count is
done for the number of pages sent to each destination.
8701 TX PGS/Port
These SPs count the number of pages sent by the physical port used to
send them. For example, if a 3-page original is sent to 4 destinations via
ISDN G4, the count for ISDN (G3, G4) is 12.
8701 1 PSTN-1
8701 2 PSTN-2
8701 3 PSTN-3
8701 4 ISDN (G3,G4)
8701 5 Network
8 711 T:Scan PGS/Comp
These SPs count the number of compressed pages scanned into the
document server, counted by the formats listed below.
8 711 1 JPEG/JPEG2000
8 711 2 TIFF (Multi/Single)
8 711 3 PDF
8 711 4 Other
SM
SERVICE PROGRAM MODE TABLES
These SPs count the number of pages sent by PC Fax. These
SPs are provided for the Fax application only, so the counts for
SP8681 and SP8683 are the same.
[0~9999999/ 0 / 1]
These SPs count the number of pages sent from the document
server. The counter for the application that was used to store
the pages is incremented.
[0~9999999/ 0 / 1]
The L: counter counts the number of pages stored from within
the document server mode screen at the operation panel.
Pages stored with the Store File button from within the Copy
mode screen go to the C: counter.
[0~9999999/ 0 / 1]
[0~9999999/ 1]
5-113 B264/B265