Ip Igmp Query-Interval; Ip Igmp Query-Max-Response-Time - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Multicast)
Defaults
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
12 Confidential and Proprietary Information of ZTE CORPORATION
The default timeout period equals to (query-interval×2 1) in sec-
onds.

ip igmp query-interval

ip igmp query-interval

Use this command to configure the frequency at which IGMP host
query messages are sent. Restore default with the no form of this
command.
Interface configuration
ip igmp query-interval <seconds>
no ip igmp query-interval
<seconds>
ip igmp querier-timeout
show ip igmp interface
ip igmp query-max-respons
e-time
Use this command to configure the maximum response time ad-
vertised in Internet Group Management Protocol (IGMP) queries.
Restore default with the no form of this command.
Interface configuration
ip igmp query-max-response-time <seconds>
no ip igmp query-max-response-time
<seconds>
It is valid only for Internet Group Management Protocol (IGMP)
Version 2.
Frequency, in seconds, at which to send IGMP
host query messages, range: 1~65535,
default: 125 seconds
Maximum response time, in seconds,
advertised in IGMP queries, range: 1~25,
default: 10 seconds