Introduction
Connecting the printer to the terminal
To establish the connection between the printer and the terminal, follow these steps:
1. Connect the printer communication cable to the terminal.
2. To start the Configuration Utility application, double–click the NCR Configuration
3. From the Printer Model drop–down list, select the printer model.
4. Select the connection type.
5. Select Connect. The application establishes the connection between the printer and
Utility.exe file. The application displays the Configuration Utility main window.
Connection
Description
Option
USB
The application automatically detects the USB type, which is
either of the following options:
•
ION
•
NCR 4610 (for 7169 only)
•
NHPI
•
PRTR
RS–232
The application displays the configuration window and requires
the following information:
•
COM Port number
•
Baud rate
•
Data bits
•
Stop bits
•
Parity
Note: To know the values, refer to
page 1.
Ethernet
The application displays the configuration window and requires
the following information:
•
IP address
Note: To know the IP address, refer to
page 1.
the terminal.
Obtaining Information
Obtaining Information
1-9
on
on