Connecting Cash Drawer Cables - NCR 7193 Service Manual

7193 Service Guide

Connecting Cash Drawer Cables

The cash drawer option is available with RS-232C interface and Parallel interface models.
This option allows up to two cash drawers to be connected to the printer in a system with a
PC that has no connectors for the cash drawer cables. The cash drawer cables usually come
with the cash drawer.
The cash drawers are operated by software command from the host computer through the
printer. For additional information on the printer commands used by the host computer to
activate the cash drawers, see "Appendix E: Commands."
1.
2.
Note: Some 7193 models may appear slightly different than what is shown in the
illustration. The procedures are the same for all models unless otherwise noted.
Plug the cash drawer cables into the connectors on the printer.
The connectors are standard phone connectors.
If only one cash drawer is used, plug the cable into the connector labeled 1.
Chapter 2: Installing the Printer
August 1998 11