Station Select Commands; Select Receipt Or Slip For Setting Line Spacing; Select Slip Station; Select Receipt Station - NCR 7156 Owner's Manual

Chapter 6: Commands

Station Select Commands

These commands decide which station any incoming data will be printed on.
Select Receipt or Slip for Printing, Slip for MICR Read
Selects the station for printing. If a slip is present and the station selected changes from slip
to receipt, the slip is ejected. If the station selected changes from receipt to slip, the printer
waits for a slip or check to be inserted, either for printing or for reading the MICR
characters. See Set Slip Waiting Time (1B 66 m n).
As there is no journal station on the 7156, bit 0 and bit 1 both select the receipt station. In
the Epson TM-930™ the command can be used to select the journal station (bit 0). The
command is valid only when input at the beginning of a line.
Hex
1B 63 30 n

Select Receipt or Slip for Setting Line Spacing

Selects the station for setting line spacing. As there is no journal station on the 7156, bit 0
and bit 1 both select the receipt station. In the Epson TM-930™ the command can be used
to select the journal station (bit 0).
Hex
1B 63 31 n

Select Slip Station

Selects the Slip Station for all functions. The receipt station is the default setting after the
printer is initialized or the Clear Printer (10) command is received. If a select command for
one station is followed by a select for another station with no data sent for the first station,
only the second station will be selected.
Hex
1C

Select Receipt Station

Selects the Receipt Station for all functions. The receipt station is the default setting after
the printer is initialized or the Clear Printer (10) command is received. If a select command
for one station is followed by a select for another station with no data sent for the first
station, only the second station will be selected.
Hex
1E
78
Vertical (normal) and rotated
Right-side up and upside down
Single high (normal) and double high
Decimal ASCII
27 99 48 n ESC c 0 n
Decimal ASCII
27 99 49 n ESC c 1 n
Decim ASCII
al
28 FS
Decim ASCII
al
31 RS
Value of n
1, 2, 3 = Receipt
4 = Slip
Value of n
1, 2, 3 = Receipt
4 = Slip
September 1997
7156 Owner's Guide