Monitor Display Selection Of Du/Pu And Terminal Am (Pr. 52 Pr. 158, Pr. 170, Pr. 171, Pr. 268, Pr. 563, Pr. 564, Pr. 891) - Mitsubishi Electric FR-D720S SC EC Instruction Manual

Parameter
6.10.2 Monitor display selection of DU/PU and terminal AM
(Pr. 52, Pr. 158, Pr. 170, Pr. 171, Pr. 268, Pr. 563, Pr. 564, Pr. 891)
The monitor to be displayed on the main screen of the control panel and parameter unit
(FR-PU04/FR-PU07) can be selected.
In addition, signal to be output from the terminal AM (analog voltage output) can be selected.
Pr.
Name
No.
DU/PU main display data
52
selection
AM terminal function
158
selection
170
Watt-hour meter clear
Operation hour meter
171
clear
Monitor decimal digits
268
selection
Energizing time
563
carrying-over times
Operating time carrying-
564
over times
Cumulative power moni-
891
tor digit shifted times
The above parameters can be set when Pr. 160 = 0.
The above parameters allow its setting to be changed during operation in any operation
mode even if "0" (initial value) is set in Pr. 77 "Parameter write selection".
FR-D700 SC EC
Initial Setting
Description
Value Range
0/5/8–12/
Select the monitor to be displayed on the
0 14/20/
operation panel and parameter unit.
(output 23–25/
Refer to Tab. 6-19 for monitor descrip-
frequency) 52–55/61/
tion.
62/64/100
1–3/5/
1 8–12/14/
(output 21/24/ Select the monitor output to terminal AM.
frequency) 52/53/
61/62
Set "0" to clear the watt-hour meter
0
monitor.
Set the maximum value when monitoring
9999 10
from communication to 0 to 9999kWh.
Set the maximum value when monitoring
9999
from communication to 0 to 65535kWh.
Set "0" in the parameter to clear the watt-
9999 0/9999 hour monitor.
Setting "9999" has no effect.
0 Displays as integral value.
9999 1 Displayed in 0.1 increments.
9999 No function
The numbers of cumulative energizing
0–65535
time monitor exceeded 65535h is dis-
0 (reading
played.
only)
Reading only
0–65535 The numbers of operation time monitor
0 (reading exceeded 65535h is displayed.
only) Reading only
Set the number of times to shift the
0–4 cumulative power monitor digit.
Clamp the monitoring value at maximum.
9999
No shift
9999 Clear the monitor value when it exceeds
the maximum value.
Monitor display and monitor output signals
Parameters referred to
30 Regenerative
function selection
70 Special regenera-
tive brake duty
37 Speed display
55 Frequency moni-
toring reference
56 Current monitor-
ing reference
Refer to
Section
6.8.2
6.8.2
6.10.1
6.10.3
6.10.3
6 - 111