Rep 7.36 Feeder No Paper Sensor Actuator - Xerox Phaser 4620 Service Manual

Figure 3 Remove the No Paper Sensor
Repairs
REP 7.35, REP 7.36

REP 7.36 Feeder No Paper Sensor Actuator

Parts List on PL 8.20 Item 3
Removal
Use safe handling procedures when removing the module. Refer to
is heavy.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the option feeder from the printer,
2. Remove the Tray.
3. Remove the Front Cover, REP
4. Remove the Right Cover, REP
5. Remove the Rear Cover, REP
6. Remove the right side frame,
7. Remove the Take Away Clutch,
8. Remove the Feed Clutch, REP
9. Remove the Feed Drive Assembly,
10. Remove the 2 screws that secure front frame rail to the chassis,
Figure 1 Remove the frame rail
11. Remove 10 (metal) and 4 (plastic) screws that secure the cover to the chassis,
5/2011
4-50
WARNING
GP
WARNING
GP 15.
7.24.
7.25.
7.27.
REP 7.34.
REP 8.40.
8.41.
REP 8.42.
Figure
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
15. The module
1.
Figure 2.