Rep 15.2 Registration Transport Assembly - Xerox Phaser 7500 Service Manual

Service Parts Disassembly

REP 15.2 Registration Transport Assembly

PL15.1.8
8-174
1. Remove the Top Rear Cover and the Rear Cover (REP 19.6,
2. Remove the Left Rear Cover (REP 19.4,
3. Remove the Tray 1 Feeder Assembly (REP 13.1,
4. Remove the Left Hand Cover Assembly (REP 14.3,
5. Disconnect the wiring harness connector on the harness that is connected to
the Regi Transport Assembly.
6. Remove 2 screws deeply recessed (silver, 8mm) that secure the Regi Transport
Assembly to the printer.
7. Remove the Regi Transport Assembly from the printer.
page 8-217).
page 8-215).
page 8-130).
page 8-148).
Phaser 7500 Printer Service Manual
s7500-236