3. SIGNALS AND WIRING
3.9 Treatment of cable shield external conductor
In the case of the CN1 and CN2 connectors, securely connect the shielded external conductor of the cable to
the ground plate as shown in this section and fix it to the connector shell.
External conductor
Sheath
Core
Sheath
External conductor
Pull back the external conductor to cover the sheath.
Strip the sheath.
(1) For CN1 connector (3M connector)
Screw
Cable
Screw
Ground plate
(2) For CN2 connector (3M or Molex connector)
Cable
Ground plate
Screw
3 - 57