Mitsubishi Electric Melservo MR-J3-A Instruction Manual page 456

Print Data *Manual Number
Apr., 2005 SH(NA)030038-C Section 5.3.3 (1): Parameters are separated into each case.
Section 5.3.3 (2): Note 2. is added.
Setting A Horizontal axis is changed to 1Mpulse.
Setting B Horizontal axis is changed to 10Mpulse.
Setting C Horizontal axis is changed to 100Mpulse.
Section 6.6.2 (1) (2): Error in Parameter screen is corrected.
Section 8.1: Setting of machine resonance suppression filter 2 is modified to
1.
Section 8.6.3 (4): Expression for setting parameter is examined.
Chapter 9: Sentence in "POINT" is changed.
Section 9.1: AL.45 AL.47 Note 1. is added.
Section 9.2: AL.33 Causes 1 2 are added.
AL.46 Modified to thermal sensor.
Section 9.3: Caution is added.
AL.E3 Content is added.
Section 10.1 (5) (6): Added.
Section 11.1: d.HF-SP502 702 is added.
Section 11.2 (1): Table is examined.
Section 11.3: Dynamic brake time constant is added.
Chapter 12: "WARNING" 10 minutes are modified to 15 minutes.
Section 12.1.1: Combinations of cable and connector sets diagram is examined.
2) Servo amplifier power supply connector is added.
3) Power supply connector set is added.
Section 12.1.2 (1) (a): Encoder connector Crimping tool are added.
Section 12.1.2 (2) (a): Note is added.
Section 12.2 (1): MR-RB31 and MR-RB51 are added.
Section 12.2 (3): Parameter No.PA02 setting 01 08 09 are added.
Section 12.2 (4): "POINT" is added.
Content is examined.
Section 12.2 (5): MR-RB31 and MR-RB51 are added.
Section 12.5 (5) (b): Outline drawing is partially modified.
Section 12.3: Added.
Section 12.4: Added.
Section 12.6 (2) (a): The free space of the hard disk is changed to 130MB.
Section 12.7 (2): Added.
Section 12.8: Part of wiring diagram is added.
Table of crimping terminals and applicable tools is added.
Section 12.16: HF3040A-UN is added.
Section 13.4.1 (5): Current alarm data [0][1] [0][8] [0][9] are deleted.
Section 13.4.2 (3): Error in reference page No. is corrected.
Section 13.4.2 (8): Data No. [2] [0] Content is changed.
Data No. [2] [1] The expression of test operation setting is
changed.
Chapter 14: Caution Sentence is added.
Description of AD75 is deleted.
Section 14.2 (2): QD75 is added.
Section 14.3 (2): Added.
Section 14.7.3 (2): Part of sentence is examined.
Revision