Mitsubishi Electric Melservo MR-J3-A Instruction Manual page 41

1. FUNCTIONS AND CONFIGURATION
(2) For MR-J3-11KA(4) to MR-J3-22KA(4)
Removal of the front cover
C)
B)
1) Press the removing knob on the lower side of the
front cover ( A) and B) ) and release the
installation hook.
2) Press the removing knob of C) and release the
external hook.
Reinstallation of the front cover
C)
B)
1) Fit the front cover installation hooks on the
sockets of body cover ( A) to B) ) to reinstall it.
Note 1. The fan cover can be locked with enclosed screws (M4
2. By drilling approximately
14).
A)
D
A)
4 of a hole on the front cover, the front cover can be locked on the body with an enclosed screw (M4
3) Pull it to remove the front cover.
(Note2)
2) Push the front cover until your hear the clicking
noise of the installation hook.
40).
1 - 20
(Note1)
(Note1)
Installation hook