Capture {Start|Stop; Capture {File|Remote|Line - NETGEAR ProSafe M7100-24X User Manual

internally allocated buffer area for export to a PC host for protocol analysis. Public domain
packet analysis tools like Ethereal can be used to decode and review the packets in detail.
Capturing can be performed in a variety of modes, either transmit-side only, receive-side only,
or both. The number of packets captured will depend on the size of the captured packets.

capture {start|stop}

Use the command capture start to manually start capturing CPU packets for packet
trace. Capturing packets is stopped automatically when 128 packets are captured and have
not yet been displayed during a capture session. It is guaranteed that packets not displayed
and not saved will not be lost when capturing is in progress. Use the command capture
stop to manually stop capturing CPU packets for packet trace before the moment when 128
packets are captured and capturing packets is stopped automatically.The packet capture
operates in three modes:
• Capture file
• Remote capture
• Capture line
The command is not persistent across a reboot cycle.
Format
capture {start|stop} {transmit|receive|all}
Mode
Privileged EXEC

capture {file|remote|line}

Use this command to configure file capture options. The command is persistent across a
reboot cycle.
Default
Remote
Format
capture {file|remote|line}
Mode
Global Config
ProSafe Managed Switch
Utility Commands
574