Show Ip Pim Rp Mapping - NETGEAR ProSafe M7100-24X User Manual

show ip pim rp mapping

This command displays the mappings for the PIM group to the active rendezvous points..
Format
show ip pim rp mapping [<rp address> | candidate | static]
Modes
Privileged EXEC
Term Definition
RP Address
The IP address of the RP for the group specified.
Group Address
Address of the multicast group
Group Mask
Mask for the group address.
Origin
Origin from where this group mapping is learned.
Expiry Time
Expiry time of the elected RP.
Example 1:
(Switch) #show ip pim rp mapping 192.168.10.1
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin Static
Expiry Time (hh:mm:ss) NA
Example 2:
(Switch) #show ip pim rp mapping
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin Static
Expiry Time (hh:mm:ss) NA
RP Address 192.168.20.1
Group Address 229.2.0.0
Group Mask 255.255.0.0
Origin Static
Expiry Time (hh:mm:ss) NA
Example 3:
(Switch) #show ip pim rp mapping candidate
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin BSR
Expiry Time (hh:mm:ss) 00:00:08
Example 4:
(Switch) #show ip pim rp mapping static
RP Address 192.168.20.1
Group Address 229.2.0.0
ProSafe Managed Switch
IP Multicast Commands
337