Ipv6 Pim Ssm; Show Ipv6 Pim Bsr-Router - NETGEAR ProSafe M7100-24X User Manual

no ipv6 pim rp-candidate
Use this command to disable the router to advertise itself as a PIM candidate rendezvous
point (RP) to the bootstrap router (BSR).
Format
no ipv6 pim rp-candidate interface <unit/slot/port> <group-address>
<group-mask>
Mode
Global Config

ipv6 pim ssm

Use this command to define the Source Specific Multicast (SSM) range of IP multicast
addresses.
Default
disabled
Format
ipv6 pim ssm {default | <group-address/prefixlength> <group-mask>}
Mode
Global Config
Parameter Description
default
Defines the SSM range access list to 232/8.
no ipv6 pim ssm
Use this command to disable the Source Specific Multicast (SSM) range.
Format
no ipv6 pim ssm
Mode
Global Config

show ipv6 pim bsr-router

Use command to display the bootstrap router (BSR) information. The output includes elected
BSR information and information about the locally configured candidate rendezvous point
(RP) advertisement.
Format
show ipv6 pim bsr-router [candidate | elected]
Mode
• Privileged EXEC
• User EXEC
Term Definition
BSR Address
IP address of the BSR.
Uptime
Length of time that this router has been up (in hours, minutes, and seconds).
BSR Priority
Priority as configured in the ip pim bsr-candidate command.
ProSafe Managed Switch
IPv6 Multicast Commands
426