Lldp Notification; Lldp Transmit-Mgmt - NETGEAR ProSafe M7100-24X User Manual

no lldp transmit-tlv
Use this command to remove an optional TLV from the LLDPDUs. Use the command without
parameters to remove all optional TLVs from the LLDPDU.
Format
no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode
Interface Config

lldp transmit-mgmt

Use this command to include transmission of the local system management address
information in the LLDPDUs.
Default
enabled
Format
lldp transmit-mgmt
Mode
Interface Config
no lldp transmit-mgmt
Use this command to include transmission of the local system management address
information in the LLDPDUs. Use this command to cancel inclusion of the management
information in LLDPDUs.
Format
no lldp transmit-mgmt
Mode
Interface Config

lldp notification

Use this command to enable remote data change notifications.
Default
disabled
Format
lldp notification
Mode
Interface Config
no lldp notification
Use this command to disable notifications.
Default
disabled
Format
no lldp notification
Mode
Interface Config
ProSafe Managed Switch
Switching Commands
174