NETGEAR ProSafe M7100-24X User Manual page 185

Term Definition
Interface
The interface in a unit/slot/port format.
Link
Shows whether the link is up or down.
ConfigMED
Shows if the LLPD-MED mode is enabled or disabled on this interface
OperMED
Shows if the LLPD-MED TLVs are transmitted or not on this interface.
ConfigNotify
Shows if the LLPD-MED topology notification mode of this interface.
TLVsTx
Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes
can be 0 (Capabilities), 1 (Network Policy), 2 (Location), 3 (Extended PSE), 4
(Extended Pd), or 5 (Inventory).
Example: The following shows example CLI display output for the command.
(Switch) #show lldp med interface all
Interface Link configMED operMED
--------- ------ --------- --------
1/0/1 Down Disabled
1/0/2 Up Disabled
1/0/3 Down Disabled
1/0/4 Down Disabled
1/0/5 Down Disabled
1/0/6 Down Disabled
1/0/7 Down Disabled
1/0/8 Down Disabled
1/0/9 Down Disabled
1/0/10 Down Disabled
1/0/11 Down Disabled
1/0/12 Down Disabled
1/0/13 Down Disabled
1/0/14 Down Disabled
TLV Codes: 0- Capabilities,
2- Location,
4- Extended Pd,
--More-- or (q)uit
(Switch) #show lldp med interface 1/0/2
Interface Link configMED operMED
--------- ------ --------- --------
1/0/2 Up Disabled
TLV Codes: 0- Capabilities,
2- Location,
4- Extended Pd,
(Routing) #
ProSafe Managed Switch
ConfigNotify TLVsTx
------------ -----------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
1- Network Policy
3- Extended PSE
5- Inventory
ConfigNotify TLVsTx
------------ -----------
Disabled Disabled
1- Network Policy
3- Extended PSE
5- Inventory
Switching Commands
185
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1